MEDIA ATTRIBUTES
Gloss Level: Matt
Available Sizes:

Material: PVC
Waterproof: NO
Basis Caliper: 3 mil / 0.08mm (with adhesive)
Release Liner: 60gsm double PE paper
Optimum printing Environment:
70℉ (30-70% Relative Humidity)

The PVA resin coated surface combined with an ultra smooth ink jet coating prevents paper cockle and yields photo realistic images. The matt surface of the vinyl provide for optimum viewing in any lighting environments.
Applications: Poster, Photos,Sings,Pop-up Stand display,Tradeshow Displays Proofing, Foam board or Colorgate board,etc.

FINISHING RECOMMENDATIONS

Lamination:

These products can be over laminated with most cold laminates and low temperature hot laminating materials.
When the photo base is over laminated with heavy gauge laminates and either mounted to a board or encapsulated, overlap the image with a 0.25" safe edge of laminate. This will seal the photo base paper, preventing moisture absorption and paper splitting. Use laminates of equal gauge when encapsulating to prevent image curl. Over laminating will also decrease the rate at which the images fade.

Mounting:

Cold pressure sensitive adhesives typically provide the most aggressive bonds and are recommended for use with these products. The strength of ADH, at the initial 30 minutes, it can bear 0.7~0.9 kg per square inch. Then 1.1~1.3kg per square inch. Caution should be used when mounting with seal "Mount Back" material as adhesive failure can occur.