Inkjet Canvas
are respectively gloss and low glare photo base canvas for use on all Dye inks & on all inkjet wide format printers.
MEDIA ATTRIBUTES
Gloss Level: Gloss
Available Sizes:
|
Product No. |
Specification |
|
801AGCA01 |
36” × 30M |
Material: Cutton
Waterproof: NO
Basis Caliper: 18.90mil / 0.48mm
Optimum printing Environment:
70℉ (30-70% Relative Humidity)
The PVA resin coated surface combined with an ultra smooth inkjet coating prevents canvas cockle and yields photo realistic images. The gloss surface of the Inkjet Canvas provide for optimum viewing in any lighting environments.
Applications: Outdoor & Indoor Textile Banner
FINISHING RECOMMENDATIONS
Lamination:
These products can be over laminated with most cold laminates and low temperature hot laminating materials.
When the photo base is over laminated with heavy gauge laminates and either mounted to a board or encapsulated, overlap the image with a 0.25" safe edge of laminate. This will seal the photo base paper, preventing moisture absorption and paper splitting. Use laminates of equal gauge when encapsulating to prevent image curl. Over laminating will also decrease the rate at which the images fade.
Mounting:
Cold pressure sensitive adhesives typically provide the most aggressive bonds and are recommended for use with these products. The strength of ADH, at the initial 30 minutes, it can bear 0.7~0.9 kg per square inch. Then 1.1~1.3kg per square inch. Caution should be used when mounting with seal "Mount Back" material as adhesive failure can occur.