MEDIA ATTRIBUTES
Gloss Level: Matt
Available Sizes:

Material: Polypropylene (PP)
Waterproof: Water Resistant
Basis Caliper: 7 mil / 0.18 mm
Optimum printing Environment:
70℉ (30-70% Relative Humidity)

When using light stable dye-based or pigment-based inks. However, it is suggested for pigment-based inks, hence images can be archived for longer period of time. The polyethylene resin coated surface combined with an ultra smooth ink jet coating prevents paper cockle and yields photo realistic images. The matt surface of the outdoor photo paper provide for optimum viewing in any lighting environments.
Applications: Poster, Photos, Pop-up Stand display, Proofing, Foam board or Colorgate board,etc.

FINISHING RECOMMENDATIONS

Lamination:

These products can be over laminated with most cold laminates and low temperature hot laminating materials.
When the photo base is over laminated with heavy gauge laminates and either mounted to a board or encapsulated, overlap the image with a 0.25" safe edge of laminate. This will seal the photo base paper, preventing moisture absorption and paper splitting. Use laminates of equal gauge when encapsulating to prevent image curl. Over laminating will also decrease the rate at which the images fade.

Mounting:

Cold pressure sensitive adhesives typically provide the most aggressive bonds and are recommended for use with these products. Caution should be used when mounting with seal "Mount Back" material as adhesive failure could occur.