Water Resistance PP With Adh.
are respectively matt and low glare photo base PP synthetic papers for use on any lighting environments.
MEDIA ATTRIBUTES
Gloss Level: Matt
Available Sizes:
|
Product No. |
Specification |
|
801ARM01PV |
36” × 30M |
|
50” × 30M |
|
|
60” × 30M |
Material: Polypropylene
Waterproof: Water Resistant
Basis Caliper: 5 mil / 0.12 mm (excludes adhesive)
Release Liner: 60gsm double PE paper
Optimum printing Environment:
70℉ (30-70% Relative Humidity)
The material can be printed with most water-based pigmented and dye inks. It can also be used on water-based piezo wide format printers with pigmented ink. Using water-based pigments will usually yield good print quality and excellent water resistance. It will offer greater light stability when using in conjunction with pigmented inks. The matt surface of the Outdoor PP film w/adhesive mount provide for optimum viewing in and attachments.
Applications: Poster, Photos, Pop-up Stand display, Proofing, Foam board or Colorgate board,etc.
FINISHING RECOMMENDATIONS
Lamination:
These products can be over laminated with most cold laminates and low temperature hot laminating materials. When the photo base is over laminated with heavy gauge laminates and either mounted to a board or encapsulated, overlap the image with a 0.25" safe edge of laminate. This will seal the photo base paper, preventing moisture absorption and paper splitting. Use laminates of equal gauge when encapsulating to prevent image curl. Over laminating will also decrease the rate at which the images fade.
Mounting:
Cold pressure sensitive adhesives typically provide the most aggressive bonds and are recommended for use with these products. Caution should be used when mounting with seal "Mount Back" material as adhesive failure could occur.